[ใหม่] ชุดซ่อมไฟเบอร์กลาส น้ำยาหล่อเย็น สูตรน้ำ น้ำมัน น้ำนม น้ำยาลอกสี

Bestchoice Foodgard Greases

Lubricant for the food and    beverage industry

Description

Beschoice foodgard greasesis a light colour and transparent multipurpose grease. It will not transmit odour or taste and specifically been designed for the lubrication of plain  and roller bearings subjected to ingress of water at elevated temperatures such as in the food industry.

Service temperature range :                     -20 up to + 120 ^oC

Consistency acc. DIN 51 818 :                 NLGI grade 2

Poss. Denomination acc.DIN 51 502 :     K 2 K-20

Benefit

Beschoice foodgard greasesforms very adhesive lubricating films capable of carrying high loads on moist or wet mechanisms subjected to friction. Since it is very resistant to hot water, water vapours and high temperatures it enables relubrication intervals to be prolonged. It is resistant to oxidation and ageing, hot and cold water, water vapours, aqueous-alkaline and acid disinfectants or cleaning agents and provides good adhesion and sealing, too.

Health information

Beschoice foodgard greasesis harmless to health acc., to the Federal Food Act § 31 section 1. Do not overlubricate to avoid unnecessary food contact. Beschoice foodgard greases complies with FDA regulations (Food and Drug Administration).The ingredients are listed in the Code of Federal Regulations-21 CFR 178.3570-

Beschoice foodgard greasesis USDA –H 2 approved.

Examples of application

Beschoice foodgard greasesis the ideal and cost-effective multipurpose grease for the food and beverage industry, big abbatoirs, food canners and large-size kitchens.

Characteristic data

Thickener                                                          Lithium-complex soap

Drop point                                 ํC                      >250                             DIN ISO 2176

Worked penetration                    0.1 mm             265-295            DIN ISO 2137

Water resistance                                                1-90                              DIN 51 807

Compatibility with plastics                                  will not attack mineral oil resistant seals.

and elastomers                                     check compatibility with other seals, if required

Base oil

Type                                                                                         medical white oil

Kin viscosity     40^oC                              mm²/s                          approx.67                                  DIN 51 562

                        100 ^oC                            mm²/s                          approx.9                                    DIN 51 562

Flash point                                           ^oC                                 >240                                         DIN ISO 2592

Pour point                                             ^oC                                 >27                                           DIN ISO 3016

This information is intended as a guide and dose not necessarily represent a marketing specification. Data may vary within modest ranges but do not adversely affect the lubricant quality. Modifications reserved 9011061

*********************