[ใหม่] หน้าปัดควบคุมTDS

Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.

• Monitors and controls TDS levels for high output commercial systems.
• Large, bright L.E.D. display.
• An alarm will sound if the TDS level rises above the user-set level.
• Installs easily in minutes.
• Includes one sensor probe (at no extra cost).
• Protective cover also available (sold separately)
   

Range: 0 - 999ppm
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 1 PPM
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable (manual)
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch).  It can be used to control a pump, solenoid valve or other device. 
Relay Voltage: 5V
Alarm: Optional steady beep (set by user)
Display: Bright 5/8" L.E.D. display
Probe: 1/2" bushing (NPT), 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)