[ใหม่] dbx 1046V

dbx 1046V
ราคา : 42700
โปรโมชั่น : 21,900.00 บาท 
NPUT

Connectors:XLR and 1/4" TRS (Pin 2 and tip hot)

Type:>Electronically balanced/unbalanced, RF filtered

Impedance:>Balanced > 40 kOhm, unbalanced >20 kOhm

Max Input Level:>> +22 dBu balanced or unbalanced

CMRR:>Typically >50 dB at 1 kHz

OUTPUT

Connectors:>XLR and 1/4" TRS (Pin 2 and tip hot)

Type:>Servo-balanced/unbalanced, RF filtered

Impedance:>Balanced 30 Ohm, unbalanced 15 Ohm

Max Output Level:>> +22 dBm balanced, > +20 dBm unbalanced

SYSTEM PERFORMANCE

 

Bandwidth:>20 Hz to 20 kHz, +0/-0.5 dB

Frequency Response:>0.35 Hz to 90kHz, +0/-3 dB

Noise:>< -96 dBu, unweighted, 22 kHz measurement bandwidth

Dynamic Range:>> 118 dB, unweighted

THD+Noise:>0.008% typical at +4 dBu, 1 kHz unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz

IMD:>< 0.1% SMPTE

Interchannel
Crosstalk:< -80 dB 20Hz to 20 kHz

Stereo Coupling:>True RMS Power Summing

COMPRESSOR

 

Threshold Range:>-40 dBu to +20 dBu

Ratio:>1:1 to infinity:1

Threshold
Characteristic:Selectable OverEasy® or hard knee

Attack/Release
Characteristic:AutoDynamic™

Attack Time:>Program-dependent

Release Time:>Program-dependent

Output Gain:>-20 to +20 dB

LIMITER

 

Threshold Range:>0 dBu to +24 dBu (off)

Ratio:>infinity: 1

Limiter Type:>PeakStopPlus® two-stage limiter

Stage 1:>PeakStop® brickwall limiter

Attack Time:>Zero

Release Time:>Zero

Stage 2:>Predictive intelligent program limiter

Attack Time:>Program-dependent

Release Time:>Program-dependent

FUNCTION SWITCHES

 

OverEasy®:>Activates the OverEasy compression function.

I/O Meter:>Switches between monitoring input and output levels on the Input/Output Level meter.

Bypass:>Activates the direct input-to-output hard-wire bypass.

OPERATING LEVEL

 

(rear panel):>Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels.

ST Link:>Links channels in stereo pairs. Channels One and Three become the master channels.

INDICATORS

 

Gain Reduction Meter:>8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB

Input/Ouptut Meter:>8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu

PeakStop™:>1 LED to indicate PeakStop™ limiting

Function Switches:>LED indicator for each front-panel switch

OPTIONS - Output Transformer

 

Per Channel:>Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx

POWER SUPPLY

 

Operating Voltage:>Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz

Power Consumption:>20 Watts

Fuse:>100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T

Mains Connection:>IEC receptacle

PHYSICAL

 

Dimensions:>1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)

Weight:>5.2 lbs. (2.4 kg)

Shipping Weight:>7.6 lbs. (3.5 kg)

>Note:Specifications subject to change without notice.